QMS | Introducing HyperLine™

QMS HyperLine™ the UK’s No1 Waterborne Acrylic highway marking rejuvenation system – award winning, innovative, high performance, cost saving and environmentally friendly. Suitable for Edge Lines, Centre Lines, Hatching & Chevrons, this pioneering technique is revolutionising the road markings throughout the United Kingdom.

QMS HyperLine™ is a combination of a cold, spray applied Waterborne Acrylic Resin and two sizes of Recycled Glass Beads, producing a road marking that is environmentally sustainable with high levels of performance and productivity.

Traffic Management is greatly reduced as the outputs can be as much as 275% greater than conventional line marking systems. Add this together with over a 200% increase in performance and very low Co₂ emissions; QMS HyperLine™ is an environmentally sustainable, high performance road marking system.

With high emphasis on environmental sustainability, we have calculated the Co₂ emissions of our QMS HyperLine™ system. Less than 1kg of Co₂ is produced per m2 of Road Marking. This includes the manufacture and application of the product. Achieving a staggering 80% saving on Co₂ emissions compared to Sprayed Thermoplastic Markings.

QMS HyperLine™ Case Study – A50 DBFO Network

In 2011, Quality Marking Services Limited carried out an installation of 247,000 metres of QMS HyperLine™ over a 17-night period on the M3 Motorway between the M27 and the M25.
According to available information, in the thirty months preceding the installation, there were seventy-seven serious and four fatal incidents recorded on the M3 Motorway, which calculates to 2.57 serious and 0.13 fatal incidents per month.

In the six months following the installation of QMS HyperLine™, serious road traffic incidents had been reduced to seven and there were no fatalities along the same section of the M3 Motorway. This is a reduction of 1.4 serious incidents per month to 1.13 – Providing 100% saving in fatalities and 54% saving in serious incidents.

But all of this additional safety improvement should not cost the earth, due to the way our material is manufactured and the high speed of application, QMS HyperLine™ can provide up to 80% total cost saving.

QMS HyperLine™ is still the only available Waterborne Resin for line marking maintenance on the UK’s Highway Network. It has tried and tested and carries a British Road Trials Certificate. With many years of proven durability and performance, in fact millions of metres laid and not a single metre failed.

Available Nationally.